Ncr S26 Manuel d'utilisateur télécharger pdf (Page 104)

Using the EISA Configuration Utility

5-14 Using the System Utilities

Adding or Removing Boards

Each time you add or remove a board, you must reconfigure your server using

the EISA Configuration Utility program.

Adding Boards

Note: If you are adding a PCI device or a plug-and-play ISA board, proceed

to step 5.

PCI devices and plug-and-play (PnP) ISA boards do not require a

corresponding CFG file. The configuration information is already stored on

the board.

To add a board, follow these steps:

1. Select “Maintain system configuration diskette” from the main menu and

press Enter.

2. From the screen that displays, select “Copy/Update CFG files” and press

Enter. A list of CFG files from your system configuration diskette

displays.

Note: The EISA Configuration Utility uses the CFG file to configure the

board into the system without creating conflict with other boards or

devices.

3. Select the appropriate CFG files and press Enter to return to the

“Maintain system configuration diskette” screen.

4. Select “Return to the main menu” and press Enter.

5. From the main menu, select “Configure computer” and press Enter. The

screen “Steps in configuring your computer” displays.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 219 220

Pas de commentaire

Ncr S26 Manuel d'utilisateur Page 104